AE2463509E0462 HOSE ASSEMBLY

OVERVIEW

Aeroquip AE2463509 High Pressure Hose Assembly

• Recommended Use for High Pressure Applications
• Tube Material: Teflon
• Tube Braiding: Polyester Braid
• Inner Diameter: 0.22 in.
• Outer Diameter: 0.44
• Fitting Orientation: Straight to Straight
• A Side Nipple Type: 37 Degree Flared
• A Side Nipple Type: 37 Degree Flared
• Operating Pressure: 3000 PSIG
• Proof Pressure: 6000 PSIG
• Burst Pressure: 9000 PSIG
• Bend Radius 1.5 in.
• Socket Threading: .4375-20 UNJF-3B
• Hose Length: 0.62 in.
• Mates with M33656 Fitting

MATERIAL COMPOSITION TEFLON NO SHELF LIFE REQUIRED THIS MATERIAL WAS PRODUCED AND IS DIRECT SHIPPED UNDER DELEGATED TERMS OF AEROQUIPS FAA PRODUCTION APPROVAL NUMBER (PQ2084CE FOR PMA PARTS, PT2084CE FOR TSOA PARTS). SATISFACTORY COMPLIANCE WITH THE CONDITIONS AND TESTS REQUIRED FOR TSO APPROVAL INDICATE THE PART HAS MET THE MINIMUM PERFORMANCE STANDARDS SPECIFIED IN THIS TSO. IT IS THE RESPONSIBILITY OF THOSE DESIRING TO INSTALL THIS PART ON AN AIRCRAFT TO DETERMINE THAT THE INSTALLATION OF THE HOSE ASSEMBLY WILL NOT CAUSE THE PART TO BE SUBJECTED TO CONDITIONS IN EXCESS OF THOSE FOR WHICH IT HAS BEEN APPROVED. THE PART MAY ONLY BE INSTALLED IN A MANNER ACCEPTABLE TO, OR APPROVED BY, THE FAA ADMINISTRATOR